HDPE Electrofusion Fittings

Home » HDPE Fittings » HDPE Electrofusion Fittings

Electrofusion is by far the most commonly used method of joining polyethylene pipes of various diameters. The two ends of the polyethylene pipe are heated and pressed together by specialized equipment to form a continuous “leak-proof” pipe. The butt fusion tube and fittings are as strong as the pipe itself and have the same service life.
Puhui can supply HDPE electrofusion fittings of various specifications from DN20mm to DN630mm. HDPE electrofusion fittings include: couplings, reducers, equal tee, reducer tee, 45 degree elbow, 90 degree elbow, short head, flange, ball valve, end cap, etc. It can be customized according to requirements. HDPE pipe fittings produced by our company are high quality new PE100 raw materials, mainly used for HDPE pipes of water and oil and gas pipeline systems.

HDPE electrofusion fittings are fully compliant with ISO4427/ AS/NSZ 4130/ BS EN 12201/ SABS standards.

HDPE electrofusion fittings Specifications

Product Name HDPE electrofusion pipe fittings
Available sizes DN20-630mm
SDR SDR7.4, SDR9, SDR11, SDR13.6, SDR17, SDR21, SDR26
Material High quality virgin PE100 raw material
Available colors Black or blue, or on request
Standards follow ISO4427 / AS / NZS 4130 / BS EN 12201 / SABS standards
Samples Available

HDPE Electrofusion Reducer Coupling

PUHUI's HDPE Electrofusion Reducer Coupling is used to join two different diameters of HDPE pipes to reduce the existing pipe diameter. The electrofusion fittings are tested for use with PE80 and PE100 pipes of various SDRs with maximum working pressures in accordance with national and international norms. All fittings have been carefully designed to provide

By |2021-03-11T01:06:34+08:00March 6th, 2021|HDPE Electrofusion Fittings|

HDPE Electrofusion Coupling

PUHUI's HDPE Electrofusion Coupling is suitable for industrial pressure applications such as water and gas. The sleeves offer a wide combination of possibilities and are easy to assemble. Fittings with 4 mm contacts ensure a solid fit between all ends of the pipe. Products Name HDPE Electrofusion Coupling Sizes DN 25-500 mm Pressure Rate SDR11,

By |2021-03-18T01:49:48+08:00March 6th, 2021|HDPE Electrofusion Fittings|

HDPE Electrofusion End Cap

PUHUI's electrofusion caps are used to seal the ends of HDPE pipes. Made of PE100 material with a precisely molded energized coil of wire, it ensures uniform melting of the strongly electrofused joint and minimizes welding and cooling time. Products name HDPE Electrofusion End Cap Sizes Available As below specification sheet in detail SDR SDR11,SDR17

By |2021-03-18T07:14:47+08:00March 6th, 2021|HDPE Electrofusion Fittings|

HDPE Electrofusion Reducing Tee

PUHUI HDPE electrofusion reducer tees are used to add a smaller size outlet to a PE pipe. Electrofusion reducer tees are typically used to supply water or gas from a main to an area because they have a smaller withdrawal (and therefore lower flow) than the original pipe. Reducing tees with precisely formed energized coils

By |2021-03-18T07:13:43+08:00March 6th, 2021|HDPE Electrofusion Fittings|

HDPE Electrofusion 45 Degree Elow

A 45° electrofusion elbow is used to join two sections of polyethylene pipe at , 45° angles, welded with an electrofusion pressure welder. Electrofusion elbow fittings are available in sizes ranging from 25 mm to 800 mm. Electrofusion fittings are made of HDPE 100 material with precisely molded energized coils, which ensure uniform melting of

By |2021-03-18T07:10:14+08:00March 6th, 2021|HDPE Electrofusion Fittings|

HDPE Electrofusion 90 Degree Elow

A 90° electrofusion elbow is used to join two sections of polyethylene pipe at 90° angles, welded with an electrofusion pressure welder. Electrofusion elbow fittings are available in sizes ranging from 25 mm to 800 mm. Electrofusion fittings are made of HDPE 100 material with precisely molded energized coils, which ensure uniform melting of the

By |2021-03-18T07:09:05+08:00March 6th, 2021|HDPE Electrofusion Fittings|
Go to Top